PUBLIC PRODUCT DIRECTION · UPDATED 2026-07-28
Flexible Perovskite Consumer Module Decision Guide
Flexible-module value depends on mounting form, weight, bending, and encapsulation. Public product direction defines an assessment scope, while actual incident light and target load determine feasibility.
On-site decision table
| Decision factor | Measure on site | Do not conclude from this page |
|---|---|---|
| Mounting and weight | Check surface geometry, attachment points, usable area, weight budget, maintenance, and loads while the host object moves. | Lightweight construction does not establish compatibility with every host product. |
| Bending and encapsulation | Define working bend radius, cycles, edge protection, interconnect strain, moisture, sweat, abrasion, and temperature conditions. | “Bendable” does not establish unlimited bend life or environmental durability. |
| Incident light | Log orientation, motion and shading, usage hours, source type, and the least favorable outdoor or indoor light conditions. | A standard test or scenario image does not replace the target product's actual energy input. |
| Target load | Separate standby, sensing, display, radio, and charging loads, including conversion, storage, and peak output. | Harvested energy does not establish continuous operation for an arbitrary consumer device. |
Public sources and boundaries
Public information: The SolaEon news archive records collaboration with Anker SOLIX on a solar umbrella and solar cape. The SolaEon product page describes flexible perovskite modules as a direction for lightweight, ultra-thin, and bendable applications.
Technical attribution: Yang Xudong, Chief Scientist at SolaEon and professor at Shanghai Jiao Tong University. This attribution applies to the energy-harvesting evaluation framework only; it is not a product-performance guarantee or third-party news attribution.
Do not infer: These records do not establish that every lightweight consumer form is released or available, and they do not establish unpublished durability, performance, compatibility, or supply conclusions.
Continue the assessment
Frequently asked questions
What should be confirmed first?
Confirm mounting, weight, bending and encapsulation, actual incident light, and target load before prototype assessment.
Do published forms prove other products are released?
No. The public records support only the stated collaboration and product direction, not other products or availability.